4 Methods of Avoiding Crosstalk in Category 6 Ethernet Cables
Is your ethernet connection one of the challenges that are slowing your online work? Does your internet connection get too much electrical interference or crosstalk? Worry no more, because the Cat6 Ethernet cable can help in solving your problems.The Cat6e cable is backward compatible, and it provides high-speed data transfers and crosstalk minimization. This post presents to you four significant modes of minimizing crosstalk in Cat6 Ethernet cables.
Crosstalk denotes the external electromagnetic interference, which causes disruptions in the flow of data. The Cat6e cable makes use of high frequencies, which allow the cable to reach a data transfer rate of 10 Gigabits. Its peak performance speed may reach 250 Mhz. With the cable’s high-frequency levels, you’ll need to make intelligent cable design and installation to prevent crosstalk.
Here are some of the measures to take when buying Cat6 ethernet cable in bulk to reduce crosstalk.
Internet cables with the least electromagnetic interference often have the best performance. But how can you know the kind of cable that has the least electromagnetic interference? Unshielded twisted paired (UTP) cables are the IT standard for internet communication because they have high bandwidth.
The pitch of the twisted pairs of wires and the cable twist rate or twists per distance have a marked influence on the level of crosstalk. A twisted pair of Cat6 Ethernet cable with few twists has a lower level of crosstalk when compared to a similar cable with fewer twists per distance. Twist rates should also differ among the pairs of wires to further reduce crosstalk.
For many cables running parallel to each other, the pairs with similar coloration should have similar twist rates to reduce crosstalk. If the network ethernet cable pairs get energized to a standard frequency during data transmission, the pairs of cables are likely to interfere with each other and lead to electromagnetic interference. It’s not possible to provide software-mediated remedies within the cables. As such, you only have to rely on the cable design and meticulous installation to prevent crosstalk.
Ethernet cable shielding is an effective way to prevent electromagnetic interference. The thicker the shielding layer that an Ethernet cable has, the lesser the level of magnetic interference that such a cable is likely to experience. The internet cable market can offer you two types of shielded cables.
You can get the Cat6 ethernet cable in bulk, either as SFTP (shielded and foiled twisted pair cable) or as the foil twisted pair cable (FTP). SFTP cables have a foil shield around the entire cable in the form of a braid screen, and each twisted pairs of wires have individual foil shielding. The FTP Ethernet cable has a shielding and an extra protective layer that gets wrapped around each twisted pairs of wires.
When running many parallel ethernet cables that are close to each other, you can use the shielded patch cords to punch them down to a patch panel to reduce crosstalk.
You can reduce the level of interference in your network by implementing proper cabling techniques and methods. The type of Cat6e cable is also crucial in influencing the level of crosstalk. For instance, the augmented UTP Cat6e cable, also known as the Cat6A cable increases the diameter of the cable to increase the separating distances between pairs of twisted wires to diminish crosstalk.
When buying Cat6 ethernet cable in bulk, always think about the twist rate, shielding, shielded patch cords, and cabling techniques and practices. These are the significant factors that determine your ability to reduce crosstalk in your networking tasks.
In 2016, the world had an estimated 3.5 billion internet users. In the same year, at least 45% of the global population used the internet. This data shows that there is lots of networking business out there. Take advantage of the booming internet usage and Cat6e networking cables to establish fast and reliable internet connections.
Related Products
